Enhance the look of your Mercedes Benz and make it stand out on the road with a stylish Mercedes Benz Led Emblem. This upgrade not only adds a touch of modern sophistication but also increases your vehicle’s visibility. Installing an aftermarket LED star emblem might seem daunting, but with this straightforward guide, even those with minimal electrical experience can achieve a professional-looking result at home. This article will walk you through each step, ensuring a smooth and successful installation of your new Mercedes Benz LED emblem.
Parts You Will Need for Installation
Before you begin, gather all the necessary components for a seamless installation. For this DIY project, you will need the following readily available parts:
-
Mercedes Benz LED Star Emblem: You can find these illuminated emblems online. A popular option is the Illuminated LED Light Front Grille Star Emblem Badge for 2013-2016 Mercedes New from eBay. Ensure it’s compatible with your Mercedes model and year.
-
Fuse Tap (Add-a-circuit): This allows you to safely draw power from your car’s fuse box without cutting or splicing wires. A suitable fuse tap like this Amazon Fuse Tap will work perfectly.
-
Electrical Tape: For insulating and securing your wiring connections. Consider using a durable, waterproof tape such as DOOR Electrical Tape to protect against the elements.
-
Basic Tools: You’ll need minimal tools for this installation, likely including a screwdriver or similar tool to access the fuse box and potentially pliers or wire strippers if you prefer a more secure connection than twisting wires and taping (though the original guide uses tape effectively).
Step-by-Step Mercedes Benz LED Emblem Installation Guide
Follow these steps to install your new LED star emblem and give your Mercedes a distinctive glow.
1. Physical Emblem Installation
The first step is to replace your existing Mercedes emblem with the new LED version.
-
Remove the Old Emblem: Locate the front grille star emblem. Typically, you can remove it by turning it counter-clockwise. Gently rotate the emblem until it loosens and you can pull it out.
-
Install the LED Emblem: Place the new Mercedes Benz LED emblem into the grille in the same orientation as the original. Turn it clockwise to secure it in place. Ensure it is firmly fitted but avoid over-tightening.
2. Wiring the LED Emblem
Now, let’s connect the electrical wiring to power up your LED emblem.
-
Access the Fuse Box: Open the hood of your Mercedes Benz. Locate the fuse box, which is usually situated in the engine compartment, often on the top right side. Open the fuse box cover to access the fuses.
-
Identify the Correct Fuse: Inside the fuse box, identify the fuses related to the lights. In many Mercedes models, these are located in the bottom right corner and might include two red 10 amp fuses and one brown 7.5 amp fuse.
-
Use the Fuse Tap: Remove the middle red 10 amp fuse using a fuse puller or pliers.
Alt text: Diagram illustrating how to correctly insert fuses into a mini blade fuse tap, with the original fuse in the top slot and a new, lower amperage fuse in the bottom slot.
Take your fuse tap and insert the removed 10 amp fuse into the top slot of the fuse tap, as shown in the provided diagram. Insert a new, lower amperage fuse (7.5 amp is recommended and often included with the fuse tap) into the bottom slot of the fuse tap. This setup maintains the original circuit’s protection while adding a fused circuit for your LED emblem.
-
Connect the LED Emblem Wiring: The LED emblem will come with a cable, typically with a red wire (positive) and a black wire (ground).
-
Red Wire (Positive): Connect the red wire from the LED emblem to the blue connector of the fuse tap. You can do this by carefully inserting the wire into the connector and clamping it down. Alternatively, for a simpler method, you can carefully cut a small section of both the LED emblem’s red wire and the fuse tap’s blue wire, twist them together tightly, and then securely wrap the connection with electrical tape.
-
Black Wire (Ground): Locate a grounding point near the fuse box. This is usually a screw that is already securing other ground wires to the car’s chassis. Loosen the screw slightly, place the black wire from the LED emblem under the screw, and then tighten the screw to ensure a good ground connection.
-
-
Insert the Fuse Tap: Plug the fuse tap, now with both original and new fuses and the red wire connected, into the fuse slot where you removed the original red fuse.
3. Final Check
-
Test the LED Emblem: Start your Mercedes engine and turn on your headlights or parking lights. The Mercedes Benz LED emblem should now illuminate.
-
Secure Wiring: Ensure all wiring is neatly tucked away and secured with electrical tape where necessary to prevent any loose wires or potential shorts.
Enjoy Your Illuminated Mercedes Star
Congratulations! You have successfully installed your new Mercedes Benz LED emblem. This simple upgrade provides a noticeable enhancement to your vehicle’s appearance, adding a touch of modern style and increased visibility. Enjoy the distinctive glow of your illuminated Mercedes star emblem!
